U-SS1000P
Drone Spoofing Suitcase — Deployable Navigation Defence
Rugged suitcase
Drone spoofing suitcase U-SS1000P deploys by a single operator in oil fields and logistics parks, taking effect in under 10 seconds with battery hot-swap support.

Drone Spoofing Suitcase Deployment
Overview
Drone Spoofing Suitcase Deployment
The Drone Spoofing Suitcase U-SS1000P packs navigation spoofing, touch-screen control and an operator terminal into a rugged case that one person can carry and deploy. Designed for oil fields, logistics parks, temporary protection sites and quick-response teams, this portable drone spoofer takes effect in under 10 seconds and supports no-fly projection, directional expulsion and area denial.
Rapid deployment is the defining advantage of the drone spoofing suitcase. Weighing at most 10 kg, the complete system travels in a 460 x 345 x 188 mm case and can be powered from its swappable battery, removing the need for generators or external power in remote locations. Within minutes of arrival, a single operator can establish a navigation-protection zone around a convoy, fuel depot or command post, then dismantle and move it to the next site.
The suitcase's integrated design includes the spoofer transmitter, antenna, power supply and visual interface, so there is no separate rack of electronics to configure. Operators select defence or deterrence strategies from the touch screen, and the system manages the signal chain automatically, cutting training time and operator error while preserving manual override for experienced users who need fine control over the deception field.
From a security perspective, the drone spoofing suitcase complements detection and jamming tools rather than replacing them. Used with a drone detector, it forms a complete counter-UAS chain: detect the threat, confirm the model, then apply navigation deception that returns the drone home, steers it away or forces a controlled landing, with planning flexibility. Its fast effect, reversible outcome, GPS ease of use and low logistic footprint make it the preferred navigation-protection tool for mobile forces and site-security contractors worldwide.
Housed in a impact-resistant pelican-style flight case, the entire suite withstands severe mechanical vibration, moisture, and dust during field transportation. Swappable high-capacity lithium battery modules allow uninterrupted continuous operation during multi-hour outdoor security missions.
The system's modular architecture supports rapid software updates to incorporate emerging satellite constellations and signal structures. Security personnel can configure complex multi-directional exclusion zones directly on the sunlight-readable field terminal interface.
Specifications
System parameters
| Model | U-SS1000P |
| Category | Navigation |
| Form factor | Rugged suitcase |
| Operating range | 500 m-1 km (customizable) |
| Frequency coverage | GPS L1 / GLONASS L1 (expandable) |
| System weight | ≤10 kg |
| Power supply | ≤30 W, swappable battery |
| Operating temperature | -20 to +55 °C |
| Ingress protection | 430 x 345 x 188 mm case |
* Ranges are measured in an unobstructed environment; differences arise due to variations in the environment and the type of equipment.
* Some parameters of the product specifications on this page may be updated; you will be informed before ordering if any change occurs.
Key features
- No-fly projection, directional expulsion and area denial
- Spoofing signal takes effect in under 10 seconds
- Defence and deterrence strategies from a visual interface
- Battery powered with hot-swap support
- Single-person transport and setup at ≤10 kg
Specify the U-SS1000P for your site.
Order inquiryDetection, jamming and deception ranges depend on environment and signal conditions. Specifications from manufacturer datasheets and subject to change.